VFG Weaponcare No.1 Cleaning Pellets .22cal 80 in pack – solid core. These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

VFG Weaponcare No.1 Cleaning Pellets .177cal 100 in pack – solid core. These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

Mineral Gun Oil by Bisley An excellent general purpose light mineral oil for all guns, accessories and equipment requiring a light viscocity oil. LubricatesProtects from rusting and corrosionPenetrates to loosen rust DO NOT use Gun Oil on the Internal workings of any airgun.  Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use.

Read more less

Silicone Gun Oil by Bisley Produces a fine high sheen finish on all shotguns, rifles and airguns and accessories that protects from moisture and dirt, eliminating rusting and corrosion.Produces a high sheen finish on all airgunsStops the corrosive effects of fingerprints on airgun barrelsHighly water and dirt repellent Beneficial to both barrel and stock Does not evaporate like mineral oils. DO NOT use Silicone Gun Oil on the Internal workings of any airgun.  Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use.

Read more less

Bisley Gun Grease 50ml Molybdenum disulphide based. It is ideally suited for all moving parts of pistols,rifles & shotguns. Its high load bearing characteristics ensure lasting performance whilst being resistant to corrosion & acidic gases. Use on compression springs, trigger mountings and release mechanisms, loading bolts, firing pin arrangements, and all moving parts where excellent slip, smooth operation and anti corrosive properties are required. DO NOT use inside pressure chambers / internal workings on PCP airguns. Use on compression springs, trigger mountings and release mechanisms, loading bolts, firing pin arrangements, and all moving parts where excellent slip, smooth operation and anti corrosive properties are required.Ensures fast smooth actionImproves performance and reliabilityReduces maintenance Lengthens life of components Reduces wear Protects from aggressive corrosive gases Do NOT insert into the barrel. Molybdenum disulfide grease Not hazardous according to Council Directive 1999/45/EC and its subsequent amendments. Prevent entry of large quantities into drains and water courses. Use Protective Clothing. Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use.

Read more less

VFG Weaponcare No.1 Cleaning Pellets .30cal / 8mm 50 in pack – small centre hole for pull through, (can use-pellet-on-top method for firing) These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review   It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

Jack Pyke Multi Gun Cleaning Kit This has a .22 Cal Rod - However we suggest this kit is really for powder burning guns and not really for airguns. The Jack Pyke Multi Gun Cleaning Kit is for those more demanding shooters with a collection of guns in their collection. It covers most popular gun sizes. A great additional accessory is the Jack Pyke Gun Cleaning Mat. Specifications Includes Pistol/rifle rods Shotgun rods & handle Brushes for 10/12 bore 20/28 bore .410 .45 .40 .357/38 cal (9mm) .17 .30 .270/280 .22cal Also cleaning patches & cleaning mops for 10/12/20/28 bore & .410/.356/38/.22 cal All in a wooden box with brass snap catch FOR USE ON .17  CAL TO 10 BORE

Read more less

Bisley Lens Cleaner 100ml Pump Spray Maximises clarity and brilliance. Our formulation is deliberately gentle to ensure that lacquer finishes are not harmed. The non smearing solution will enhance shooting, particularly in low light conditions. The Anti Static formulation will reduce further particles attaching to the lens. 100ml pump spray. Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use.

Read more less

Hoppes Bore Snake .22 M-16 - .225 ALWAYS CLEAN A SAFE, UNLOADED RIFLE / AIRGUN  This is more suited to break barrel airguns - the long brass end part may NOT clear the small breach on some PCP airguns. If you open the packet you keep it. As with all pull throughs we are NOT responsible if anything gets stuck, breaks, jams, blocks or causes any damage to you or your rifle / gun. It is you that has put the pull through down the barrel and not us. We do not replace or refund broken pull throughs. We do not cover that under warranty in any way. The product is designed to be pulled and pushed, if it breaks then its broken. The original fastest bore cleaning tool on the planet has a new home. Hoppe's BoreSnake® Den is a compact carrying case with a built-in handle for easy storage between firearm cleanings. It conveniently fits in a range bag or backpack to protect your BoreSnake® brushes during transport. The lid of the Snake Den doubles as a convenient pull handle that snaps into the clear case for storage. A one pass solution, BoreSnake® uses an integrated bronze brush to scrub out carbon fouling, while the tail clears the barrel of loose debris with a surface area 160x larger than a standard patch. Patented one-piece design Has 160x larger surface area than a standard patch Convenient new case for easy storage and transport Lid doubles as a pull handle Extremely packable Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use. We do not ship this outside of England, Scotland and Wales.

Read more less

Hoppes Bore Snake .177 (No Brush) ALWAYS CLEAN A SAFE, UNLOADED RIFLE / AIRGUN  This is more suited to break barrel airguns - the long brass end part may NOT clear the small breach on some PCP airguns. If you open the packet you keep it. As with all pull throughs we are NOT responsible if anything gets stuck, breaks, jams, blocks or causes any damage to you or your rifle / gun. It is you that has put the pull through down the barrel and not us. We do not replace or refund broken pull throughs. We do not cover that under warranty in any way. The product is designed to be pulled and pushed, if it breaks then its broken. The original fastest bore cleaning tool on the planet has a new home. Hoppe's BoreSnake® Den is a compact carrying case with a built-in handle for easy storage between firearm cleanings. It conveniently fits in a range bag or backpack to protect your BoreSnake® brushes during transport. The lid of the Snake Den doubles as a convenient pull handle that snaps into the clear case for storage. A one pass solution, BoreSnake® uses an integrated bronze brush to scrub out carbon fouling, while the tail clears the barrel of loose debris with a surface area 160x larger than a standard patch. Patented one-piece design Has 160x larger surface area than a standard patch Convenient new case for easy storage and transport Lid doubles as a pull handle Extremely packable Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use. We do not ship this outside of England, Scotland and Wales.

Read more less

Napier - Universal Cleaning Mat  Great for use in the home. Protect surfaces from scratches and chemicals. This super mat is big enough for any sporting rifle or shotgun, non slip neoprene base and a chemical/oil resistant synthetic suede work surface.Handy docking panel keeps cans and small parts in place, easily rolled up and carried whenever required. 138cm x 40cm Washable - Warm wash only and allow to air dry Oil Resistant Lint free work surface Protective Padding  

Read more less