FX Airguns Angled Manometer Bracket Impact M3 For Sub 12ft Lbs and FAC / High Power M3 Impacts Only The FX Impact M3 has extra expansion holes on the right hand side just above the grip, these are to add the much requested quick view option of the regulator pressure for the rear regulator via a side mounted gauge. This kit is the bracket and O ring parts only. FX Official Kit. It does NOT include any gauges or tools for the install. Please watch the video below from Airbuks that provides simple instructions on how to add the bracket. Remember - safety first - and you are working with high pressure air so caution. When the video shows the rifle being cleared of air via adjustment of the regulator, you can dry fire the rifle a few times to bleed the system. Always check the rifle is not loaded in any way before dry firing. The rear underside regulator gauge should unscrew by hand with no air in the system. Then simply screw in the supplied blocking screw and use the rear gauge on the newly installed bracket. The gauges will not always line up horizontal this is a trial and error part of the install. Gauges may also require a bit more that finger tight to make the seal. Always use caution and select the correct tool so no damage is caused to any gauges. Basically what we are saying is - if you mess up your rifle or any parts when installing this, its down the customer - we are not responsible. But it is easy to fit. Any lost or damaged O rings during install will NOT be replaced by Airgun 101 Shop - the kits are checked before despatch and we do not carry spares. This is a HOME INSTALL kit. Airgun 101 Shop is in NO WAY responsible for ANY damage to your rifle, any property or any person - either when installing or using this product in the future. A basic level of understanding is required.    This is a home install item. We do not offer any install service. Any damage to your rifle, or any injury to any person through using or installing this product is not the responsibility of Airgun 101 Shop or its parent company. Safety first when working on any rifle, ensure the gun is safe before starting any form of work.

Read more less

FX Airguns - Original Chronograph Pole Mount This stiff carbon fiber rod attaches to the side picatinny accessory rail of both the FX Impact, Impact MK2, Impact M3 and FX Maverick, and allows the perfect positioning of the FX Radar Chronograph without effecting POI should you take the Chronograph Mount off the rifle. Just another option to help tailor the shooting experience of your FX Airgun. Overall Length 34cm Carbon Pole Length 26cm Weight 90 grams You still need to use the existing Chronograph barrel mount that comes with your Chronograph and elastic bands.  Best mounting practise is to have the Chrono as close to the barrel end as possible.

Read more less

FX Airguns - Tungsten Hammer Weight This is a small hammer weight to fit FX Impacts. WARNING - If you make your rifle go above the UK Non License limit that would be an offence.  It requires your rifle to be taken apart, which is done ENTIRLEY AT YOUR OWN RISK, WE DO NOT OFFER ANY AFTER SERVICE OR ADVICE. This is a home install item. We do not offer any install service. Any damage to your rifle, or any injury to any person through using or installing this product is not the responsibility of Airgun 101 Shop or its parent company. Safety first when working on any rifle, ensure the gun is safe before starting any form of work.

Read more less

FX Airguns - Panthera / Dynamic Double Air Adapter Kit This FX Panthera / Dynamic double airkit enables you to attach a second compressed air reservoir to your FX Panthera or FX Dynamic air gun. At the front end, just below the barrel, youll find a connector. With this double airkit you can attach a compressed air reservoir to that connector. This allows you to double the amount of compressed air you can use to shoot. Along with the double airkit, youll get a plug. Would you prefer to remove the rear compressed air reservoir and shoot using only the front reservoir? Then you can easily remove the rear reservoir and use the plug to close off the connector. To be clear, you MUST discharge the rifle of all air before install this, at your own risk, just be careful. The front rail on the Panthera / Dynamic may need to be removed to allow an air bottle at the front. The adapter and the plug are both made of aluminium.

Read more less

Element Optics - Helix Scope Caps Front And Back Element Optics Helix Scope Caps Front And Back These are the basic plastic flip up caps to fit the Element Optics Helix.

Read more less

FX Impact - Service Kit - MK1 / MK2 Contains all the parts that normally require replacing through wear and tear.  All repairs must be undertaken by a competent person and Airgun 101 is not liable in anyway for any damage to any person or belonging using this product. Service Your rifle at your own risk. Contains detailed drawings.

Read more less

FX Airguns - Panthera Barrel Weight Stainless Steel 90mm This FX Panthera 90 mm 250 gram barrel weight can be placed on the barrel of the Panthera by means of two Allen screws under the barrel shroud to balance and stabilize the weapon. This is designed for the FX Panthera 700mm barrel. This barrel weight for the FX Panthera has a length of 90 mm, weight of 250 grams and is made of stainless steel.

Read more less

Element Optics - Titan Scope Caps Front And Back Element Optics Titan Scope Caps Front And Back These are the basic plastic flip up caps to fit the Element Optics Titan.

Read more less

Magazine Conversion Kit MK1 + MK2 Impacts - Old Style Mag to New Side Shot Mag If you have an older FX Impact (pre-late 2019 - MK2), than you can easily convert it to take the FX Impact Hi-Cap Side Shot magazine. By using the FX Hi-Cap Side Shot magazine conversion kit, you can enjoy the advantage of having a higher capacity than the standard magazine and it’s easier to load too, as the lid can be removed. Kit Includes: Bracket - Metal 1 x .30 Side Shot High Capacity Magazine Instructions: This is a home install kit, and you will need to remove the bottle, clear the system of air and remove the regulator gauge - its easy to do with basic level skills - Airgun101 accepts no liabilty for damage or harm in anyway installing / using this product.

Read more less

Element Optics - Titan Elevation Cap MRAD This is a single replacement turret screw cap for the MRAD Element Optics Titan 1 per pack.  

Read more less

Magazine Conversion Kit MK1 + MK2 Impacts - Old Style Mag to New Side Shot Mag If you have an older FX Impact (pre-late 2019 - MK2), than you can easily convert it to take the FX Impact Hi-Cap Side Shot magazine. By using the FX Hi-Cap Side Shot magazine conversion kit, you can enjoy the advantage of having a higher capacity than the standard magazine and it’s easier to load too, as the lid can be removed.  Kit Includes: Bracket - Metal 1 x .25 Side Shot High Capacity Magazine Instructions: This is a home install kit, and you will need to remove the bottle, clear the system of air and remove the regulator gauge - its easy to do with basic level skills - Airgun101 accepts no liabilty for damage or harm in anyway installing / using this product.

Read more less

FX Airguns - Hammer Weight Tungsten Mav/WC3/Dre/Crown This is a small hammer weight to fit FX Crown, Wildcat MK3, Dreamline + Crown WARNING - If you make your rifle go above the UK Non License limit that would be an offence.  It requires your rifle to be taken apart, which is done ENTIRLEY AT YOUR OWN RISK, WE DO NOT OFFER ANY AFTER SERVICE OR ADVICE. This is a home install item. We do not offer any install service. Any damage to your rifle, or any injury to any person through using or installing this product is not the responsibility of Airgun 101 Shop or its parent company. Safety first when working on any rifle, ensure the gun is safe before starting any form of work.

Read more less