NEW - Eagle Vision Pard NV008S / Sytong / Arken Zulus Mount - Windage + Elevation Adjustable Eaglevision have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope: It can be directly fitted to the SYTONG vision scope - no need for Sytong Mount. It can be directly fitted to the PARD 008S vision scope - no need for Pard Mount If using the Arken Zulus, you will need to use the supplied Arken Zulus mount to attach direct to the Eagle Vision mount. 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 4. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: 170mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 225 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)2 x side screws1x m5 spring screws1x Waterproof case6x aluminium washers M6 to M5 adapter use for Sytong6x  read stainless steel M6 washers M6 spacer use for pard 008S Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. Washer Fitting Guide is HERE Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters. This video is for the earlier version - but the basic setup still applies. Just additional use of the washers with the Pard Screws. Mini Version is now available - click here. Use the separate windage and elevation screw to fine tune the mount. Picatinny Mounting ( purchase optional extra Pic to Dovetail adapter )  Bubble Mount NOT included - Can be purchased separately 

Read more less

HIKMICRO Cheetah HM-C32F-SL 2.7x Day/Night Vision Twilight LRF Rifle Scope FREE POSTAGE ON THIS SCOPE THIS IS THE BLACK FRIDAY PRICE ON THE SCOPE. END WEDS 2ND DEC. WHILE STOCKS LAST. WHEN ITS GONE ITS GONE. The Cheetah LRF Riflescope is a high performance dedicated digital day & night riflescope. Optimised to deliver a high resolution full colour image in the day time before converting to night mode to give you a detailed black and white image with up to 400m of detection distance with the built in IR illuminator.  The on-board 1000m Laser Range Finder is accurate to within 1m, and when programmed with the relevant data the in-built ballistic calculation software will add a new hold-over point on the reticle to account for the detected distance, making for straightforward shooting. The Cheetah from HIKMicro is similar to the popular Pard NV008 LRF models from years past, it is superior in backup to other new brand scopes breaking into he market, our top tip is buy what has UK support - not an alibabba special at these prices.  The Cheetah is capable of outstanding night time performance, drawing on all of HIKMICRO’s expertise in sensor technology and software design. The inbuilt IR delivers up to 400m of detection range in total darkness and delivers a crisp image to the HD OLED display.   The Cheetah LRF is supplied with a picatinny rail so it is ready to attach to your rifle straight out of the box. 2560 x 1440 px Frame Rate25 Hz Focal Length32 mm Minimum Focus Distance3 m Field of View8.1° x 6.1° ApertureF1.2 Magnification2.7x Full Colour Day ModeYes Black & White Night ModeYes Detection Distance (with Inbuilt IR)400 m Display Type12.5 mm OLED Display Resolution1920 x 1080 px Image ModesDay, Night, Auto, Defog Exit Pupil6 mm Eye Relief45 mm Laser Range Finder Max Measuring Distance1000 m Measurement Accuracy- Safety Class for LaserClass 1 Magnification (Digital)1x, 2x, 4x, 8x One-Shot ZeroYes Standby ModeYes Picture-in-PictureYes Recoil-Activated RecordingYes Max Recoil750 g Reticle Options5 Reticle Options Zero Profiles5 Zero Profiles Audio RecordingYes Wi-Fi ConnectionYes HIKMICRO Sight AppCompatible StorageBuilt-in 64 GB Battery1x Replaceable 18650 Battery Run Time5.5 Hours (Continuous Running) Battery Capacity DisplayYes Recharging MethodExternal Charger (Supplied) Working Temperature-30°C to 55°C Dimensions182 mm x 70 mm x 87 mm Weight465 g (Without Eyepiece) Degree of Protection, IP CodeIP67 Water ProtectionProtected Against Temporary Submersion in Water Warranty Period3 Years - with manufacturer  HIKMICRO has a full UK service and technical centre, complete with Hotline: 0203 514 0092 available to assist with any issues.

Read more less

HIKMICRO Alpex 4K A50EL LRF Digital Day & Night Rifle Scope w/ Ballistics Calculator - 50mm UHD Sensor 3840x2160px FREE SHIPPING ON THIS SCOPE You want your night vision scope to look like a scope, well here it is. HikMicro have hit the ball out the park with this one, 4K sensor, onboard and rechargeable battery compatible with a ballistic calculator. Only thing missing is a IR torch, which you can easily buy. However the low light capability is superb, thus some shooters never bother. It mounts using 30mm rings and we suggest a no limit mount as it helps with zeroing. We could blind you with a big wordy write up, but let's be honest this thing works well and is now probably the market leader when it comes to night vision.  A UK based service centre from HiK is a bonus, with a plethora of companies coming on line with night vision copies and money grabbing deals, honestly this is the one to go for for most airgun shooters and above, it does what it says you can see the target at night. Simple. Below are the tech specs and bumf to help wet the appetite. 3840 × 2160 Frame Rate50 Hz Lens (Focal Length)50 mm, F1.2 to 2.5 Adjustable Aperture Detection RangeDay Min. Focusing Distance10 m Magnification3.5x to 28.0x (8x). Support Continuous Zooming Field of View8.8° × 5.0°/15.3 m × 8.6 m @100 m Display1920 × 1080, 0.49 inch, OLED Image ModeDay, Night Exit Pupil6 mm Eye Relief55 mm Diopter (Range)-5 D to 5 D Record VideoOn-board Video Recording Record Video Resolution1920 × 1080 Capture SnapshotYes Audio RecordingYes Recoil-activation RecordingYes Standby ModeYes StorageBuilt-in EMMC (64 GB) PIPYes Freeze ZeroingYes Distance MeasurementNA Zeroing Profiles5 Max. Recoil1000 g/0.4 ms HotspotYes Ballistic CalculationYes Battery TypeTwo Rechargeable Lithium Batteries (Internal), One Replaceable and Rechargeable 18650 Battery (External) Battery Operating Time11 hours of Continuous Running (@25°C, Hotspot off) Power Supply5 VDC/2 A, USB Type-C Interface MountingStandard 30 mm Protection LevelIP67 Working Temperature-30°C to 55°C (-22°F to 131°F) Dimension439.8 mm × 89.2 mm × 84.0 mm Weight1176 g without External Battery Safety Class for LaserClass1 Wavelength905 nm Max. Measuring Range1000 m Measurement Accuracy±1 m Min. Measuring Range10 m 4K UHD Sensor: greater detail & magnification with reduced pixelation 1000m Laser range finder with ballistic calculation Replaceable 18650 batteries Improved, enlarged viewfinder screen Updated control wheel design Physical aperture control to match ambient light Suitable for hunting in forest & field Night & day hunting A new benchmark in any light In the Box HIKMICRO Alpex 4K A50EL LRF Digital Day & Night Rifle Scope w/ Ballistics Calculator - 50mm UHD Sensor 3840x2160px Quick start guide Type-C USB cable Lint-free cloth Battery Battery charger Bag Battery: 1 year warranty - with manufacturer  Unit: 3 year warranty- with manufacturer  Detector: 10 year warranty- with manufacturer  HIKMICRO has a full UK service and technical centre, complete with Hotline: 0203 514 0092 available to assist with any issues. Opening and using this product deems it as used and accepted.  

Read more less

Eagle Vision Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s This is the MINI version of the original Pard mount, only 12.5cm top rail size. Description: We have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( Does NOT fit the Pard NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. Technical information for the new ‘INFINITY’ mount: Length: 12.5cm / Base 12.5cm / Pic Rail 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

Nitecore Portable USB Battery Charger UI2 Ideal if you wish to use an unbranded third party battery / speed charge for your Pard NV 008 or NV 007 Using an unbranded and unprotected battery ( not using the included Pard battery in your NV 008 or NV 007 ) is always risky due to the nature of the battery not being recommended to the Pard quality required. Thus, third party untested batteries in any device its alway recommended to use an external charger. This is ideal for Night Vision torches and other items that take a Li-ion or IMR rechargable battery.  Also if you are using an overly powerful USB charger such as a speed charger, its always best to charge any battery outside your device.  It is best practise to always charge any 18650 in an external charger and not in the product itself. 18650 batteries are powerful and if one fails inside your expensive product the warranty will not cover damage through battery charging issues. The Nitecore UI2 is a lightweight, 2 bay, USB li-ion battery charger, perfect for traveling and charging on-the-go. Offering compatibility with a wider variety of batteries, the compact charger can be used with large sized batteries, including 20700 and 21700 cells.The UI2 automatically determines the optimal charging current when a battery is inserted; if below 2.9V the low current charging mode of 100mA will be activated or if over 2.9V the standard mode with a maximum charging current of 800mA is adopted. Featuring a micro USB port, the UI2 is comptaible with various power sources, including mobile sources such as power banks and solar panels, in addition to USB adapters and other USB ports. The Nitecore UI2 has a simple display which indicates the charging status of each slot using three LEDs. The charger provides anti-short circuiting and reverse polarity protection, intelligent thermal protection and automatic termination upon charging completion, to keep your batteries in the best of health.The charger is compatible with the following Li-ion/IMR batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650. Input: DC 5V/2A 10Q Output: 4.2V±1% 800mA x 2 (Max) Compatible with: Li-ion/IMR 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650 Dimensions: 125.5 mm x 59.5 mm x 32.1 mm / 4.94" x 2.34" x 1.26" Weight: 79.5 g / 2.8 oz. Battery and charger plug are not include. Airgun 101 Shop is NOT responsible for any damage, harm or injury to any person or item when using this product. It contains full instructions and guidance.

Read more less

ZB_Lite Pro Universal - Adjustable Picatinny Mount - PARD NV 008 - Camiszon THIS IS FOR THE EARLY VERSION PARD NV008 SCOPES - NOT THE NEW S SERIES IF YOU WANT THE NEW PARD NV008S VERSION CLICK HERE The zeroing block ZB Lite Pro is a universal mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it The NEW zeroing block ZB Pro Universal is a mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elvation and windage to zero it. *New Universal Version allows you to mount your PARD NV008 without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted when it try's to pass the mount - this is the same as the Original Pard mount when the scope is mounted towards the rear. The mount also connects to the Pard using 2 shorter screws that are included. If you use the original Pard screws they are too long using this mount. THIS DOES NOT FIT THE PARD NV008S SCREW HOLES. IT WILL STILL ACCEPT THE BRACKET OF THE PARD BUT NOT THE SCREW HOLES. * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Do recommend when fixing through the unit / rail - only use for PCP Airguns. Giles Opinion - This is a handy mount for you Night Vision users. The finish is better than the original, and addition of mounting holes is a welcome feature. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :195 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm *New Universal Version allows you to mount your PARD NV008 without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted when it try's to pass the mount - this is the same as the Original Pard mount when the scope is mounted towards the rear. The mount also connects to the Pard using 2 shorter screws that are included. If you use the original Pard screws they are too long using this mount.

Read more less

ZB Pro Universal Zeroing Block - PARD S Series compatible - Camiszon This version is compatible with the New Pard NV008 S scopes. The NEW zeroing block ZB Pro Universal is a mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it. *This modified version of the universal mount allows you to mount your PARD NV008S / PARD NV008S LRF  without the need for the PARD Mount (ZB should be mounted in reverse if not using the optional extra riser)*  THIS DOES NOT INCLUDE RISER PLATES - Can be found here. Gives you a few mm extra height Allows you to use a sun shade if required Allows you to use the ZB Mount forward mounted rather than reverse mounted  * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Do recommend when fixing through the unit / rail - only use for PCP Airguns. Giles Opinion - This is a handy mount for you Night Vision users. The finish is better than the original, and addition of mounting holes is a welcome feature. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :195 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm *New Universal Version allows you to mount your PARD NV008S without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted if you do not use the riser. The screws that are supplied with the Pard units will not be long enough, use the included screws from ZB.

Read more less

Nitecore New i2 Intellicharger - Mains Charger This is ideal for Night Vision torches and other items that take a Li-ion or IMR rechargable battery.  Also if you are using an overly powerful USB charger such as a speed charger, its always best to charge any battery outside your device.  It is best practise to always charge any 18650 and RCR 123A in an external charger and not in the product itself. 18650 and RCR 123A batteries are powerful and if one fails inside your expensive product the warranty will not cover damage through battery charging issues. The NEW i2 charger from Nitecore improves upon the original model with six new features: 100% Charging Acceleration Active Current Distribution Technology Expanded Compatibility to Support 3.7V and 4.35V batteries IMR Battery Restoration Automatic Current Selection Based on Battery Capacity Automatic Detection of Non-Rechargeable Lithium Batteries 100% Charging acceleration means the NEW i2 can charge at up to 1000mA current in one slot.Active current distribution (ACD) technology allows for the dynamic distribution of the NEW i2's charging power. For example, when two batteries are being charged in the NEW i2 and one of them completes charging, all charging power will automatically go to the other slot and charge the battery at the fastest speed.Expanded compatibility to support 3.7V and 4.35V batteries allows you to charge a host of batteries with a single charger. Compatible with 1.2V, 3.7V, 4.2V and 4.35V. By simple operation with the V button it is easy to set charging voltage in each slot independently.IMR battery restoration will restore 0V depleted cells by pressing and holding both the C and V buttons simultaneously.The NEW i2 can intelligently select the most appropriate charging current based on automatic battery capacity detection.The charger comes with a UK 3 pin plug.Safety features include: Optimisation for IMR charging by monitoring the voltage stays within safe limits Overtime charging protection, limiting to 20 hours Made from fire retardant, flame resistant materials Automatic Intelligent Temperature Control preventing overheating Compatible with Li-ion/IMR/LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16345 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700 (without protection board only), 22500, 22650, 25500, 26500, 26650 and Ni-MH (NiCd): AA, AAA, AAAA, C, D. Input: AC 100~240V 50/60Hz 0.25A (max) 8W          DC 9~12V Output:4.35V±1%/4.2V±1%/3.7V±1%/1.48V±1%           500mAx2/1000mA x1 Dimensions: 132 mm x 70 mm x 35 mm Weight: 126 g (excluding batteries and power cord)   Airgun 101 Shop is NOT responsible for any damage, harm or injury to any person or item when using this product. It contains full instructions and guidance.

Read more less

Uniross Supreme Energy 2500 MAH 3.6V Rechargeable Lithium Battery - Pip Top Uniross 2500 MAH 3.6v Lithium Battery Long-Lasting Power New and Updated for 2020 Works seamlessly with Uniross battery chargers Rechargeable and long-lasting Please note: This is the PIP TOP variant - they do not fit the Pards ( Pards require the flat top versions) We advise to only charge any 18650 battery using an external charge. A battery going faulty if charged in the scope / optic / add on would damage the unit and that is not covered by the warranty.  

Read more less

Pulsar Digex C50 Digital Day / Night Vision Rifle Scope With IR + WIFI We here at Airgun 101 Shop think this scope has simply the best low light NON IR image on the market. Just our opinion.  The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night.This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in front of the Digexs objective lens focus ring for instant switching.Available in two models (was four but only two now, so stop waiting for the Non Wifi models they ain't coming back) - the Digex C50 without an IR Illuminator, the Digex C50 with IR (X850S) Illuminator.Please note that the Digex X850S IR Illuminator is also available for purchase as a separate accessory. Digex C50 models are also backwards compatible with X850 & X940 IR Illuminators (see individual products for more details).The Digex C50 has excellent optical capabilities, featuring a large 50mm objective lens (f/1.4) with a 3.5x base magnification and 4x digital zoom for a total of 14.0x magnification at a 6.7° field of view. These powerful optical characteristics combined with the optional X850S IR Illuminator allow the Digex C50 a distance detection of up to 550m. Power is provided to the Digex C50 via the intelligent dual battery system. This system consists of an internal, rechargeable battery and a rechargeable APS2 battery pack that can be recharged through the Digex itself (USB-C) or removed and charged with the dedicated APS battery charger (included). Models that include the X850S IR Illuminator will also include a removable & rechargeable APS2 battery pack for self-contained, optimised performance.The scopes exterior is made from a high-strength metal alloy and takes the shape of a traditional dayscope with a 30mm ring compatible body. In brief the Digex C50 Features: FHD CMOS Sensor Black & White & Full Colour image display Removable eye-safe 850nm IR illuminator with independent APS2 battery (PUL-76635-L) -25°C to 50°C Operating temperature Mounts using standard 30mm scope rings 5 Zeroing profiles (50 distances) One-Shot zeroing 16GB Internal Memory Picture-in-Picture mode 3-Axis gyroscope & accelerometer 50mm Eye-Relief Dual battery system - Built-In APS3 battery & a quick-change rechargeable APS2 battery IR version comes with 2x APS2 batteries and charger Non-IR version comes with 1x APS2 battery and charger Stream Vision 2 compatible 10 Reticles (9 Colours) Three Scalable ballistic reticles Instant start-up Stadiametric rangefinder IPX7 Waterproof Built-In photo & video recorder (with sound) Metal Body Recoil rated up to .375 cal. Side incline indication (Cant) One shot zeroing function ' Freeze Zeroing ' function Precise ' Zoom zeroing ' function SumLight Wide-angle eyepiece with removable Eye Cup with Magnet Ring Mounts using standard 30mm day scope rings Automatic shutdown (customisable time) Auto-Exposure Adjustment Pulsar video on the instruction manual - Click HERE We do not ship this product outside of the UK.

Read more less

Sytong HT-66 12mm 1-3.5x Digital Night Vision Rear Add On FACTORY SPECIAL OFFER - WHEN ITS GONE ITS GONE. New for 2021, the Sytong HT-66 1x-3.5x 12mm Night Vision Rear Add On allows you to quickly turn your standard optical Scope into a high-performance Night Vision system. Designed to fit the needs of both Air Rifle and Centerfire shooters. Offering a wider field of view (when compared to the 16mm counterpart due to slightly less magnification) the 12mm hits the needs of shooters who require their device for shorter ranges. The large internal screen produces a high resolution and clear image of your surroundings in full colour during daytime or switch to night mode and use three levels of 850nm IR intensity with the focusable lens system to generate a clear view over hundreds of meters during complete darkness. The supplied 45mm collar attaches to the eyepiece of your scope and allows you to quickly attach and detach the unit as the shooting conditions change, without any shift in point of impact. (Additional collars in various sizes will be available in due course.) This is an exciting and high-performing addition to the Night Vision Shooting Optics! The manufacturer includes a Power Adapter - however we advise to ONLY charge the 18650 battery using an external charger, any damage caused to the unit during charging is NOT covered by the warranty.  Please note: TF Memory Card not included. Laser Pointer has been removed. Battery not included on orders outside of mainland UK (including Northern Ireland).  A 3 Pin Plug Adapter is required. Not included. More Information Brand Sytong Popularity Sytong HT-66 12mm 1-3.5x Digital Night Vision Rear Add On SKU SYT-HT66-W-12MM-45MM Unit Type Night Vision Display Resolution 1024x768 Display Type AMOLED FOV @ 100 yards 21° Infrared Illuminator Wavelength 850nm Magnification (Optical) 3.5x Operating Temperature -20/+50°C Sensor Resolution 1920x1080 Video Recording Yes WiFi Yes   Sony CMOS sensor, the new sensor offers the following advantages over the Pard NV007A Clearer image compared to the Pard 007A giving a greater viewing range. No picture lag when panning. The Sytong can still be used where you can no longer see anything with the Pard without an IR emitter. The sensor can down-regulate the image much faster when the IR light is switched on. No more fading due to overly focusable IR light, this means using in an enclosed area such as a forest is much easier on the eye. The screen can be dimmed down to 10% at the push of a button, from “extra dark” to “extra bright”. (With Pard this is only possible via the menu and only up to 50%). Integrated gyrometer sensor with rotation and inclination angle display. All buttons can be operated silently. The IR emitter can be focused more strongly, which also increases the range. According to the manufacturer, the device is bulletproof up to 6000 joules, tested with caliber 9.3×62 mm (Pard up to 5000 J). Own app for live image transmission with direct access to previously saved photos and videos that can be downloaded directly to the smartphone. Better placed buttons simplify operation, especially in manual mode. SD card is much easier to change. Whats In the Box? Hex Wrench Sytong HT66 12mm Digital Night Vision Rear Add On Tape Data Cable 2 Pin Power Adapter (A 3 Pin UK Power Plug Adapter is required for use in the UK Not Included.) User Manual 1 x 18650 Battery Please note: TF Memory Card not included.

Read more less

Sytong HT60 LRF 3-8x Digital Night Vision Rifle Scope (with Laser Rangefinder) FEATURES Integral laser rangefinder The perfectly designed Sytong HT60 now comes with an integral laser rangefinder, allowing shooters to laser rangefind their quarry to ensure they are accurately range finding when out in the field. Making their night shooting activities more accurate then ever. Environmental adaptability Waterproof grade IPX7, high-grade aviation aluminum alloy shell, fall and shock-resistant, strong and durable, high-temperature resistant, cold resistant and dust resistant. Far observation distance Max. magnification up to 8x.Max. Viewer distance up to 200m.Continuous zoom in and out.Infrared light synchronised with lens with clearer night vision effect. High imaging quality The display screen fulfills military-grade quality standards and its resolution, display effect, definition and colour are all industry-leading, which can greatly improve the observation experience, as well as manual support, mobile detection, and video recording. Simple operation, high capacity battery The HT-60 can be detached and used independently as a Night Vision Monocular. Wireless transmission, convenient storage, and up to 8 hours of battery life are added bonuses. The latest incarnation of the Sytong HT-60 LRF has arrived! The 3-8x has been created to fit the needs of the shooters who require less magnification and more Field of View. The versatile 3x magnification will make this a perfect choice for shooters looking to use the HT60 for vermin control at short range on Air Rifles, Rimfires and even Centerfires. This Digital Night Vision Rifle Scope now comes with an integral Laser Rangefinder ensuring you can make the most accurate decision before taking on targets. This small, compact and versatile Digital Night Vision Scope has the ability to be used as both a handheld Night vision LRF Monocular and also as one of the most affordable Laser Rangefinding Rifle Scopes on the market. The Sytong HT60 LRF offers a full-colour Scope for daytime shooting and switches seamlessly into a powerful Night Vision Scope at the press of a button. The large internal screen produces a high resolution and clear image of your surroundings, whilst the 3x base magnification, which can be boosted up to 8x with digital magnification, allows you to identify and engage with targets at longer distances. The onboard 850nm IR illuminator offers three intensity settings and can be focused to optimise the performance at close range or over long distances. The supplied Picatinny rail easily attaches the HT-60 LRF to your Gun and the zero menu is quick and easy to use. Please note: TF Memory Card not included. Laser Pointer has been removed. Battery not included on orders outside of mainland UK (including Northern Ireland).  We do advise an external charger to charge the battery - do not charge the battery in the unit - 18650 batteries are high power and if the battery fails on charge it would damage the unit and this is not covered by the warranty. We give as a free gift an external charger with this unit. Non returnable and no cash value on the free charger. Adjustable Eaglevision mounts do not fit direct to the underside of this unit, the Sytong mounting bracket must still be used - but can be mounted onto an adjustable mount. More Information Manufacturer - Sytong Sytong HT60 LRF 3-8x Digital Night Vision Rifle Scope (with Laser Rangefinder) SYT-HT6038LRF Type - Night Vision Detection Range - 200m Display Resolution - 1024x768 Display Type - AMOLED FOV @ 100 Yards - 4.4° Generation - Digital Intergrated IR Illuminator - Yes IR Illuminator Wavelength - 850nm Magnification Digital - 2.66x Magnification Optical - 3x Operating Temp — 20/+50°C Rangefinder - LRF Sensor Resolution - 1920x1080 Video Recording - Yes Wifi - Yes SPECSHT60/LRF3 Type CMOSResolution, pixels 1920x1080Optical characteristics Objective lens focus 45mmMagnification 3/4/5/6/7/8xFocal ratio, D/f' 1:3Eye relief 40 mmFiled of view 6.0°X4.5°Diopter eyepiece adjustment +5/-5 DMin. focusing range 3mIR Illuminator YesType / Wavelength, nm 850Display Type / Resolution 0.39 inch / AMOLED / 1024X768Operational characteristics Power supply 3-4.2 VBattery 18650 /3200mAhExternal power supply 5V (USB)Operating time (at t=22℃) 6 hoursMax. recoil power, Joules 6000Degree of protection IP67Operating temperature ﹣20℃...50℃Dimensions 185X99X50 mmNet weight 490gVideo recorder Video / photo resolution 1024x768Video / photo format .mp4 / .jpgMemoery type TF card, max.support 128GWiFi YesWiFi Password 12345678Standart 802.11 b/gLine-of-sight reception range 15mLaser Rangefinder IntegralWavelength 905nmMax. measuring range 1000mMeasuring accuracy +/- 1m IN THE BOX? Sytong HT-60 LRF 3-8x Digital Night Vision Rifle Scope Picatinny Mount Data Cable Hex Wrench User Manual Cleaning Cloth 1 x 18650 Battery Please note: TF Memory Card not included. WE DO NOT SHIP THIS PRODUCT OUTSIDE OF ENGLAND, SCOTLAND AND WALES.

Read more less

Uniross Supreme Energy 2500 MAH 3.6V Rechargeable Lithium Battery - Flat Top Uniross 2500 MAH 3.6v Lithium Battery Long-Lasting Power New and Updated for 2020 Works seamlessly with Uniross battery chargers Rechargeable and long-lasting Will fit Pard NV 008 LRF and P + NV 007 - current models Please note: This is the FLAT TOP variant We advise to only charge any 18650 battery using an external charge. A battery going faulty if charged in the scope / optic / add on would damage the unit and that is not covered by the warranty.  

Read more less

HIKMICRO ALPEX A50T Day & Night Riflescope with 850nm IR Illuminator FREE SHIPPING ON THIS SCOPE PLEASE NOTE: NO SCOPE RINGS COME WITH THIS RIFLE SCOPE.  Furthermore, please be advised that the supplied charger is designed for the 18650 IR torch battery only. DO NOT IN ANY CIRCUMSTANCE attempt to recharge the CR123A ( or any other ) batteries in this scope. Batteries NOT supplied. PLEASE NOTE: When purchasing further CR123A batteries for your unit , please ensure the voltage on the battery is no greater than 3.0V. HIKMICRO ALPEX Day & Night Rifle Scope with 850nm IR Illuminator. The ground-breaking Alpex day and night rifle scope is BORN FOR LOW LIGHT HUNTING. The advanced sensor technology and image processing deliver a detailed, full-colour image throughout the day - automatically adjusting to twilight and continuing to display an amazing full-colour image up until total darkness. When darkness sets in, a single button press activates the black and white night mode and the performance of the sensor shines again. Any ambient light such as the moon or starlight is enough to provide a basic image while adding the supplied IR torch allows you to see a highly detailed view of your surroundings. Built on a traditional 30mm rifle scope tube chassis the Alpex is easy to mount using conventional rifle scope rings and retains the classic look of your rifle. The rifle scope tube also hosts the two internal lithium batteries that provide an outstanding 13 hours of runtime. The top turret that traditionally contains the windage adjustment holds a battery compartment where you can add an additional CR123a to gain an extra hour of runtime in an emergency. The ergonomic design puts all of the major controls of the Alpex within easy reach. Rolling the jog dial up and down controls your digital magnification (3.5x – 14x). Press and hold this in to access the menu which includes a simplified zeroing system with the inclusion of freeze-frame and magnification. Advanced software provides up to 5 zeroing profiles allowing you to use the Alpex on multiple Rifles. The three buttons on the eyepiece control the power, recording and quickly switch between Day & Night mode while the precise focus adjustment is located around the objective bell at the front of the scope. The Alpex is also fitted with a microphone and recoil-activated recording so it is easier to record your special hunting moment onto the built-in 64GB internal memory. Connecting to the HIKMICRO Sight app makes it quick and easy to share these memories with your friends or stream the output from the scope in real-time while you are in the field with your hunting buddy. Please note: The sensor used in the Alpex is extremely sensitive so does not require a high-power IR torch to provide a clear image,  you may notice overexposure if used with extremely powerful VCSEL torches. Main: Max Resolution: 1920x1080 Frame Rate: 50Hz  Lens (Focal Length): 50mm Min. Focusing Distance: 3m Field of View: 7.7 degrees x 5.8 degrees Aperture: F1.2 Magnification: 3.5x Image Display: Display: 1024x768, 0.39 inch, OLED Image Mode: Day, Night Exit Pupil: 5mm Eye Relief: 60mm Diopter (Range): -5D to 5D System: Digital Zoom: 1x, 2x, 4x Capture Resolution: 1440x1080 Record Video: On-board video recording Standby Mode: Yes PIP: Yes Capture Snapshot: Yes Freeze Zeroing: Yes Recoil Activation Recording: Yes Record Video Resolution: 1440x1080 Max. Recoil: 1000g Reticle: Yes Audio Recording: Yes Wi-Fi Hotspot: Yes, HIKMICRO Sight App Storage: Built-in EMMC (64GB) Power Supply: Battery Type: Two rechargeable Lithium batteries (internal) and one replaceable CR123A (external not supplied ) Battery Operating Time: 12 hours continuous running (@ 25 degrees Celcius, Wi-Fi off) Battery Capacity Display: Yes Anti-Reverse Battery Connection: Yes Overvoltage Protection: Yes Power Supply: 5 VDC/2A, USB Type-C interface, supports QC3.0 General:  Working Temperature: -30 to 55 degrees Celcius (-22 to 131 degrees Fahrenheit) Dimensions: 442mm x 78.1mm x 83.5mm Weight: 1062g without eyepiece and CR123A Protection Level: IP67 What's in the box? HIKMICRO Aplex Day/ Night Vision Rifle Scope 1x IR Torch 1x IR Torch Bracket 1x Battery Charger - not for CR123A batteries. 1x Bag 1x Type-C Cable 1x Quick Start Guide 1x Dust-free Cloth 3 Year Warranty - with manufacturer. HIKMICRO has a full UK service and technical centre, complete with Hotline: 0203 514 0092 available to assist with any issues. We do not ship this outside of England, Scotland and Wales.

Read more less

Pulsar Digex C50 Digital Day / Night Vision Rifle Scope With WIFI This is the NON IR Version We here at Airgun 101 Shop think this scope has simply the best low light NON IR image on the market. Just our opinion.  The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night.This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in front of the Digexs objective lens focus ring for instant switching.Available in two models (was four but only two now, so stop waiting for the Non Wifi models they ain't coming back) - the Digex C50 without an IR Illuminator, the Digex C50 with IR (X850S) Illuminator.Please note that the Digex X850S IR Illuminator is also available for purchase as a separate accessory. Digex C50 models are also backwards compatible with X850 & X940 IR Illuminators (see individual products for more details).The Digex C50 has excellent optical capabilities, featuring a large 50mm objective lens (f/1.4) with a 3.5x base magnification and 4x digital zoom for a total of 14.0x magnification at a 6.7° field of view. These powerful optical characteristics combined with the optional X850S IR Illuminator allow the Digex C50 a distance detection of up to 550m. Power is provided to the Digex C50 via the intelligent dual battery system. This system consists of an internal, rechargeable battery and a rechargeable APS2 battery pack that can be recharged through the Digex itself (USB-C) or removed and charged with the dedicated APS battery charger (included). Models that include the X850S IR Illuminator will also include a removable & rechargeable APS2 battery pack for self-contained, optimised performance.The scopes exterior is made from a high-strength metal alloy and takes the shape of a traditional dayscope with a 30mm ring compatible body. Pulsar video on the instruction manual - Click HERE We do not ship this product outside of the UK.

Read more less

Eaglevision Pard NV007 A /V Adapter Tube This tube is designed to replace the Pard NV007 A/V tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Example of use - You have purchased a Pard Adapter Kit, with the S connector and you now wish to connect an A/V 007 Pard - this is the part you require to purchase.

Read more less

Pard NV008S / Sytong Convertor Rail for Original Mount Own one of the Original Pard NV008 adjustable mounts from Eaglevision - have you upgraded to a new Pard Version NV008S or have the Sytong system. This top rail allows you to change the top rail on the original mount to the new hole configuration.  This is only the Pard NV008S / Sytong Rail - you must have the original mount to attach this to. This is for the rail in the picture ONLY. 1x top rail2x allen keys (two different sizes)6x side aluminium washers (not included with NV008, NV008P, NV008LFR) Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. See the fitting guide. Click Here.  

Read more less

 ZB Lite Pro - Adjustable Picatinny Mount - Ideal for PARD NV 008 - Camiszon The zeroing block ZB Lite Pro is a universal mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it   * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Giles Opinion - This is a handy mount for you Night Vision users. The finish is OK, but could be better, anodising is not perfect all round. However thats cosmetic. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :200 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm

Read more less