Nitecore RCR123A Li-ion battery 650mAh NL166 Nitecore RCR123A / 16340 Li-ion battery (650mAh) 650 mAh 3.7V 2.4Wh Intergrated battery overcharge/discharge protection circuits High discharge performance Li-ion rechargeable battery More than 500 charge-discharge cycles Please note: We are unable to accept returned batteries once they have been opened, so please ensure they are the correct cell for your device before ordering.   Airgun 101 Shop is NOT responsible for any damage, harm or injury to any person or item when using this product. It contains full instructions and guidance.

Read more less

Molicel 18650 Flat Top Battery M35A 3,500mAh - 10A  An ideal replacement / spare battery for devices such as the Pard Nightvision equipment. Sold in a OEM style. As with any rechargeable battery we strongly advise charging the battery in an external charger and not in the devise itself. Molicel are an established lithium-ion battery company, supplying major brands such as Dyson. The M35A is a high capacity battery with 3,500mAh, and an 10A constant discharge rating. The M35A is ideal for low wattage, high ohm applications.  Any damage to any person, object or anything at all - caused by the failure of these high power batteries is in no way the responsibility of Airgun 101 Shop or its connected partners. 

Read more less

Nitecore Portable USB Battery Charger UI1 Ideal if you wish to use an unbranded third party battery / speed charge for your Pard NV 008 or NV 007 Using an unbranded and unprotected battery ( not using the included Pard battery in your NV 008 or NV 007 ) is always risky due to the nature of the battery not being recommended to the Pard quality required. Thus, third party untested batteries in any device its alway recommended to use an external charger. This is ideal for Night Vision torches and other items that take a Li-ion or IMR rechargable battery.  Also if your using an overly powerful USB charger such as a speed charger, its always best to charge any battery outside your device.  It is best practise to always charge any 18650 in an external charger and not in the product itself. 18650 batteries are powerful and if one fails inside your expensive product the warranty will not cover damage through battery charging issues. The Nitecore UI1 is a portable USB li-ion battery charger, perfect for traveling and on-the-go charging requirements. Offering compatibility with a wider variety of batteries, the compact charger can be used with large sized batteries, including 20700 and 21700 cells.The UI1 automatically determines the optimal charging current when a battery is inserted; if below 2.9V the low current charging mode of 100mA will be activated or if over 2.9V the standard mode with a maximum charging current of 800mA is adopted. Featuring a micro USB port, the UI1 is comptaible with various power sources, including mobile sources such as power banks and solar panels, in addition to USB adapters and other USB ports. The Nitecore UI1 has a simple display which indicates the charging status using three LEDs. The charger provides anti-short circuiting and reverse polarity protection, intelligent thermal protection and automatic termination upon charging completion, to keep your batteries in the best of health.The charger is ompatible with the following Li-ion/IMR batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650. Input: DC 5V/1A 5W Output: 4.2V±1% 800mA (Max) Compatible with: Li-ion/IMR 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650. Dimensions: 122.5 mm x 29.2 mm x 32 mm / 4.82" x 1.15" x 1.26" Weight: 40.5 g / 1.43 oz. Battery and charger plug are not include. Airgun 101 Shop is NOT responsible for any damage, harm or injury to any person or item when using this product. It contains full instructions and guidance.

Read more less

Eaglevision Pard NV007S Adapter Tube This tube is designed to replace the Pard NV007S tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Note - The photos are a generic photo and the Eaglevision logo is not on the first batch of adapters. Example of use - You have purchased a Pard Adapter Kit, with the A/V connector and you now wish to connect an S 007 Pard - this is the part you require to purchase.

Read more less

Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the Pard NV007S tube. PLEASE BE AWARE - THIS S VERSION DOES NOT FIT THE V VERSION PARD. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007A/V adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007S 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007A/V

Read more less

108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125 We have designed and developed an amazing new Picatinny mount.We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount. This is the shorter version of the Original Pard Mount. 12.5cm Top Rail. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( will not fit NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with a Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. Longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: Top Rail 12.5cm / Bottom Piece 12.5cm / Rail Section 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

ZB Lite Riser Block - for Pard S Model Only This is the 3D printed riser block for the ZB Pro Universal Zeroing Block - PARD S Series compatible - Camiszon ONLY for the ZB Pro Universal Zeroing Block - PARD S Series compatible - Camiszon - Click Here to see If you have the S Model ZB - Lite mount this riser allows better mounting and space for easier use on the Pard NV008 models.

Read more less

 ZB Lite Pro Extended Version - Adjustable Picatinny Mount - PARD NV 008 - Camiszon The zeroing block ZB Lite Pro Extended Version is a universal mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it  THIS IS THE LONGER VERSION 20cm TOP RAIL * ZB Lite Pro Extended Version can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Giles Opinion - This is a handy mount for you Night Vision users. The finish is OK, but could be better, anodising is not perfect all round. However thats cosmetic. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :252 gr Dimensions :255x65x27mm Top weaver rail length :200 mm Locking jaws span : 54 mm

Read more less

HIKMICRO ALPEX A50T-S Day & Night Vision Rifle Scope BARE BONES 3.5x 50mm 1920x1080px FREE SHIPPING ON THIS SCOPE This is an opportunity to own a bare bones night vision and day scope, which looks like a scope and does not break the bank. The highly popular Alpex A50 now comes in this scope only package. This is the NON LRF HD Version. DO NOT IN ANY CIRCUMSTANCE attempt to recharge the 2x supplied CR123A ( or any other ) batteries in the scope unit. PLEASE NOTE: When purchasing further CR123A batteries for your unit , please ensure the voltage on the battery is no greater than 3.0V. Always use a separate charger ( not supplied ) to charge any rechargeable batteries, do not charge in the scope. HIKMICRO ALPEX Day & Night Rifle Scope - BARE BONES - Scope Only. The ground-breaking Alpex day and night rifle scope is BORN FOR LOW LIGHT HUNTING. The advanced sensor technology and image processing deliver a detailed, full-colour image throughout the day - automatically adjusting to twilight and continuing to display an amazing full-colour image up until total darkness. When darkness sets in, a single button press activates the black and white night mode and the performance of the sensor shines again. Any ambient light such as the moon or starlight is enough to provide a basic image while adding an optional extra IR torch allows you to see a highly detailed view of your surroundings. Built on a traditional 30mm rifle scope tube chassis the Alpex is easy to mount using conventional rifle scope rings and retains the classic look of your rifle. The rifle scope tube also hosts the two internal lithium batteries that provide an outstanding 13 hours of runtime. The top turret that traditionally contains the windage adjustment holds a battery compartment where you can add an additional CR123a to gain an extra hour of runtime in an emergency. The ergonomic design puts all of the major controls of the Alpex within easy reach. Rolling the jog dial up and down controls your digital magnification (3.5x – 14x). Press and hold this in to access the menu which includes a simplified zeroing system with the inclusion of freeze-frame and magnification. Advanced software provides up to 5 zeroing profiles allowing you to use the Alpex on multiple Rifles. The three buttons on the eyepiece control the power, recording and quickly switch between Day & Night mode while the precise focus adjustment is located around the objective bell at the front of the scope. The Alpex is also fitted with a microphone and recoil-activated recording so it is easier to record your special hunting moment onto the built-in 64GB internal memory. Connecting to the HIKMICRO Sight app makes it quick and easy to share these memories with your friends or stream the output from the scope in real-time while you are in the field with your hunting buddy. Please note: The sensor used in the Alpex is extremely sensitive so does not require a high-power IR torch to provide a clear image,  you may notice overexposure if used with extremely powerful VCSEL torches. Main: Max Resolution: 1920x1080 Frame Rate: 50Hz  Lens (Focal Length): 50mm Min. Focusing Distance: 3m Field of View: 7.7 degrees x 5.8 degrees Aperture: F1.2 Magnification: 3.5x Image Display: Display: 1024x768, 0.39 inch, OLED Image Mode: Day, Night Exit Pupil: 5mm Eye Relief: 60mm Diopter (Range): -5D to 5D System: Digital Zoom: 1x, 2x, 4x Capture Resolution: 1440x1080 Record Video: On-board video recording Standby Mode: Yes PIP: Yes Capture Snapshot: Yes Freeze Zeroing: Yes Recoil Activation Recording: Yes Record Video Resolution: 1440x1080 Max. Recoil: 1000g Reticle: Yes Audio Recording: Yes Wi-Fi Hotspot: Yes, HIKMICRO Sight App Storage: Built-in EMMC (64GB) Power Supply: Battery Type: Two rechargeable Lithium batteries (internal) and one replaceable CR123A (external) Battery Operating Time: 12 hours continuous running (@ 25 degrees Celcius, Wi-Fi off) Battery Capacity Display: Yes Anti-Reverse Battery Connection: Yes Overvoltage Protection: Yes Power Supply: 5 VDC/2A, USB Type-C interface, supports QC3.0 General:  Working Temperature: -30 to 55 degrees Celcius (-22 to 131 degrees Fahrenheit) Dimensions: 442mm x 78.1mm x 83.5mm Weight: 1062g without eyepiece and CR123A Protection Level: IP67 What's in the box? HIKMICRO Aplex Day/ Night Vision Rifle Scope 2x HM-3632DC Batteries - DO NOT CHARGE THESE BATTERIES THEY ARE A ONE TIME USE ONLY - These batteries are NON RECHARGABLE 1x Type-C Cable 1x Quick Start Guide 3 Year Warranty - with the manufacturer. HIKMICRO has a full UK service and technical centre, complete with Hotline: 0203 514 0092 available to assist with any issues. We do not ship this outside of England, Scotland and Wales.

Read more less

WULF FIIR LED 850NM IR 38mm Ultra Wide Illuminator The WULF Fi IR 38mm Torch: The LED based IR illuminator comes in 850NM. Offering a clean image to your night vision rifle scope or observation system. The WULF Fi IR 38mm boasts a 38mm focusable head, which provides a ultra wide beam when on flood mode and a simple turn of the head switches you to a precise spot beam for extended distances. This IR illuminator pairs seamlessly with a range of models, including the HikMicro Alpex and the brand new HikMicro Alpex 4K, Pulsar C50, Pard NV008S, Sytong HT60 Pard DS35, and Arken Zulus. Bracket to attach to any item is not included. 38mm aspheric lens head 850NM IR Pill Clean LED beam Ultra Wide Beam Simple to use at night thanks to a single mode operation - switching between flood and spot will lower intensity) Ability to switch between a spot or flood beam thanks to a focusable head Head Diameter: 43mm Body Diameter: 25mm Tail Diameter: 31mm Length: 129mm + 10mm Weight: 148g Runtime: 1-3 hours Focus/zoom In the Box WULF FIIR LED 850NM IR 38mm Ultra Wide Illuminator 1x 2600mah 18650 battery 1x 18650 USB single charger    

Read more less

Eagle Vision Fully Adjustable Picatinny Torch, Laser, Mount  1 per Pack This is the Micro Version of the fully adjustable windage and elevation mount, ideal for adding accessories and making them fully adjustable with ease. We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, HEIGHT ADJUSTMENT, that allows the Accessoris to move vertically and horizontally along a guided path, and lockable in different positions, using 2x  screws on the side of this mount. 2. Longer range shooting:Pair of this mounts can be instal under any Picatinny scope mount and do elevation or hight adjustments for long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 3.Using Single can fully adjustable Windage/elevation, using pair can be only elevating Technical information for the new mount: Length: 60mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 81 grams Product includes: 1x Infinity picatinny Torch mount3 x Allen keys, (two different sizes)3 x side screws2 x m5 spring screw Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the pard NV007A/V tube. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007S adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007S Version.

Read more less