Ideal Mounts for Airgun / Rifle scopes - all the sizes and price ranges to hold that valuable optic glass steady for you to take your shot. BUY Now Online. Best Makes - FX Airguns / Wheeler / Sportsmatch
Rifle Scope Mounts - Rings / Rails / Adjustable
Eagle Vision Eagle Vision - Forward Infinity Elevation Adjustable Scope Mount Picatinny 30mm
Eagle Vision Forward Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. The mount can be used as low profile or adjusted to the high profile too if your scope objective its too close to your rifle barrel or shroud. This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets. The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun. We are very proud of this product as it has been becoming a “must have” solution among people who love their bullpups. The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Exceptionally well presented in the case and finished to a very high quality. Details: Height: 65 mm to 69.5 mm (adjustable) Profil height: 21 mm Adjustable height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in open position Ring size: 30 mm In the box 2 x infinity scope mounts 2 x allen key set – different sizes 2 x small spear screws 2 x large spear screws 1 x waterproof case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£97.99£94.99
-
Wheeler Engineering Wheeler Pic Rail Scope Rings - 34mm - High - Anti Cant - Pic Rail
Wheeler Pic Rail Scope Rings - 34mm Anti Cant Level - Pic Rail Securely mount your scope to any picatinny rail. The 6-screw design provides increased clamping force to keep the optic in place during recoil and the integrated articulating anti-cant mechanism helps keep your gun level for your long range shots. 15mm height from mount bottom ( not rail clamp ) to bottom of scope - see pic. 6061 aluminum construction with flat top on ring for leveling 6-hole ring design with retained lock nuts that secure to pic rail Integrated anticant level swing out Includes torx screws and tool
£82.98
-
Eagle Vision Eagle Vision - Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34
Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99£83.98
-
Element Optics Element Optics - RF Rangefinder Module
Element Optics - Rangefinder Module LRF This can pair with the Hypr 7 or the Element Ballistics app. IT WILL ALSO WORK AS A STAND ALONE UNIT Hypr 7 not required. The Element Optics Rangefinder Module takes the concept of what a laser rangefinder should be and turns it on its head. Instead of using an optical viewfinder, this unit connects to your weapon system, and can be “zeroed” to your riflescope. This eases your workflow and enables you to range and engage your target without changing position. And it’s not just the range it will tell you; the RF Module will present you with an accurate firing solution out to 1000 Meters, harnessing the full power of the integrated Ballistics Chip to factor in weather conditions, incline, spin drift and more. Create a ballistic profile on an app, send it across in seconds, and have the relevant data displayed on the rear screen. Weapon Mountable Element Ballistics Chip Bluetooth Connectivity Remote Switch Included 1000m range USB-C Charging TUBE DIAMETER 30mm RANGING DISTANCE 5-1000m CONNECTIVITY Bluetooth BEAM DIVERGENCE 2 MRAD BATTERY Rechargeable CR2 LENGTH 97.3mm (3.83”) WEIGHT 116g (4.09oz) WEATHER RESISTANT YES BALLISTIC CHIP YES Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£485.99
-
Eagle Vision Eagle Vision - Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s
Eagle Vision Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s This is the MINI version of the original Pard mount, only 12.5cm top rail size. Description: We have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( Does NOT fit the Pard NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. Technical information for the new ‘INFINITY’ mount: Length: 12.5cm / Base 12.5cm / Pic Rail 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.98
-
ZB Lite ZB_Lite Pro Universal - Adjustable Picatinny Mount - PARD NV 008 - Camiszon
ZB_Lite Pro Universal - Adjustable Picatinny Mount - PARD NV 008 - Camiszon THIS IS FOR THE EARLY VERSION PARD NV008 SCOPES - NOT THE NEW S SERIES IF YOU WANT THE NEW PARD NV008S VERSION CLICK HERE The zeroing block ZB Lite Pro is a universal mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it The NEW zeroing block ZB Pro Universal is a mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elvation and windage to zero it. *New Universal Version allows you to mount your PARD NV008 without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted when it try's to pass the mount - this is the same as the Original Pard mount when the scope is mounted towards the rear. The mount also connects to the Pard using 2 shorter screws that are included. If you use the original Pard screws they are too long using this mount. THIS DOES NOT FIT THE PARD NV008S SCREW HOLES. IT WILL STILL ACCEPT THE BRACKET OF THE PARD BUT NOT THE SCREW HOLES. * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Do recommend when fixing through the unit / rail - only use for PCP Airguns. Giles Opinion - This is a handy mount for you Night Vision users. The finish is better than the original, and addition of mounting holes is a welcome feature. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :195 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm *New Universal Version allows you to mount your PARD NV008 without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted when it try's to pass the mount - this is the same as the Original Pard mount when the scope is mounted towards the rear. The mount also connects to the Pard using 2 shorter screws that are included. If you use the original Pard screws they are too long using this mount.
£98.95
-
Wheeler Engineering Wheeler Pic Rail Scope Rings - 30mm - Anti Cant - High 15mm
Wheeler Pic Rail Scope Rings - 30mm - Anti Cant - High - 15mm Securely mount your scope to any picatinny rail. The 6-screw design provides increased clamping force to keep the optic in place during recoil and the integrated articulating anti-cant mechanism helps keep your gun level for your long range shots. Centerline height from top of rail: High - 1.100 in Top of Rail to bottom of mount 15mm 6061 aluminum construction with flat top on ring for leveling 6-hole ring design with retained lock nuts that secure to pic rail Integrated anticant level swing out Includes torx screws and tool
£82.98
-
Sportsmatch Sportsmatch - 30mm Dovetail 9.5-11.5mm - HT036C - 21mm Mounts
Sportsmatch - 30mm Dovetail High 9.5-11.5mm - HT036C - 21mm Mounts Tube Diameter = 30mm Mount System = 9.5 -11.5 mm Dovetail - High Model T036C
£34.99
-
Tier One Tier One - Scope Mounts 1 Inch 25.4mm Picatinny Medium
Tier One - Scope Mounts 25.4mm Picatinny Medium These are 1 Inch Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a plastic box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£129.99
-
BKL Technologies BKL-301 S 30mm 2 Piece Double Strap Medium Dovetail Scope Rings
BKL-301 S 30mm 2 Piece Double Strap Medium Dovetail Scope Rings 11mm These are some of the most popular and trusted dovetail mounts. BKL-301 is a sturdy set of rings designed for the target shooter looking for more dovetail clamping surface. Featuring a 'Self-Aligning' clamping systems BKL competition grade rings and mounts are well equipped to fit a variety of rail widths on many different types of airgun & rimfire rifles Overall Length: 1" Clamp Length: 1" Ring Width: 1" Bottom of Mount to bottom of Scope Tube: 0.979" Weight: 3.5 oz. This item sold as a set Base is blank Matte Silver in colour
£57.99
-
Sportsmatch Sportsmatch - 1 Inch Dovetail 9.5-11.5mm - TO4C - 21mm Mounts
Sportsmatch - 1 Inch Dovetail 9.5-11.5mm - TO4C - 21mm Mounts 1 Inch Diameter Body Tube - Med 21mm ( A ) Mounts Tube Diameter = 1 Inch Mount System = 9.5 -11.5 mm dovetail Model TO4C
£24.42
-
ZB Lite ZB Pro Universal Zeroing Block - PARD S Series compatible - Camiszon
ZB Pro Universal Zeroing Block - PARD S Series compatible - Camiszon This version is compatible with the New Pard NV008 S scopes. The NEW zeroing block ZB Pro Universal is a mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it. *This modified version of the universal mount allows you to mount your PARD NV008S / PARD NV008S LRF without the need for the PARD Mount (ZB should be mounted in reverse if not using the optional extra riser)* THIS DOES NOT INCLUDE RISER PLATES - Can be found here. Gives you a few mm extra height Allows you to use a sun shade if required Allows you to use the ZB Mount forward mounted rather than reverse mounted * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Do recommend when fixing through the unit / rail - only use for PCP Airguns. Giles Opinion - This is a handy mount for you Night Vision users. The finish is better than the original, and addition of mounting holes is a welcome feature. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :195 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm *New Universal Version allows you to mount your PARD NV008S without the need for the PARD Mount (ZB should be mounted in reverse)* Please NOTE - the focus ring on the front of the Pard will be restricted if you do not use the riser. The screws that are supplied with the Pard units will not be long enough, use the included screws from ZB.
£98.95
-
Sportsmatch Sportsmatch - 1 Inch Dovetail 9.5-11.5mm - HT08C - 24mm Mounts
Sportsmatch - 1 Inch Dovetail 9.5-11.5mm - HT08C - 24mm Mounts 1 Inch Diameter Body Tube - High 24mm ( A ) Mounts Tube Diameter = 1 Inch Mount System = 9.5 -11.5 mm dovetail Model HT08C With Arestor Pin HT08C - Sportsmatch Website
£23.99
-
Hatsan Hatsan Optima Protector Scope Mount
Hatsan Optima Long Range Scope Mount • Eliminates almost all recoil force• Suitable with 1” (25.4mm) tube diameter rifles scopes. Dovetail Mount
£50.99£49.99
-
Eagle Vision Eagle Vision - One Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm
Eagle Vision One Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws.The mount can be used as low profile or adjusted the to high profile too if your scope objective its too close to your rifle barrel or shroud.This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets.The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun.We are very proud of this product as it became a “must have” solution among people who love their bullpups.The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Please note: DO NOT use more than 4x elevation screws as you may damage your mount. Details: Height: 65 mm to 69.5 mm (adjustable) Profil Height: 21 mm Adjustable Height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in opened position Ring size: 34 mm Rail size: 22 mm picatinny Item includes: 1 x infinity scope mount 3 x allen key set – different sizes 4 x small spear screws 6 x large screws 1 x waterproof case Pressure calculation: Ring screws maximum Torque, 15-20 Inch-pounds Force to 1.68-2.25 NM Newton Meters. Adjustable side screws maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters. Picatinny nuts maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters.
£107.98
-
Sportsmatch Sportsmatch - 34mm Picatinny / Weaver - 13mm High - Medium
Sportsmatch - 34mm Picatinny / Weaver - 13mm High - Medium - T088 34mm Diameter Body Tube Medium Range Suitable for all Weaver / Picatinny rails. Includes square section hardened steel arrestor bolt. Up to 50mm lens diameter (on most rifles) 34mm Diameter Body Tube Tube Diameter = 34mm Mount System = Weaver / Picatinny Model T088 13mm Height ( A ) - From bottom of clamp to bottom of scope ring. B = 21mm long
£74.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny High
Tier One - Scope Mounts 30mm Picatinny High These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£124.99
-
Sportsmatch Sportsmatch - 30mm Picatinny / Weaver - T078 - 15mm Mounts
Sportsmatch - 30mm Picatinny / Weaver - T078 - 15mm Mounts Single Thumb Turn mount Fits 30mm tube For Scopes Upto 50mm 2 PIECE MEDIUM WEAVER / PICATINNY 30mm A = 15mm B = 21mm Weight = 108g Includes square section hardenedsteel arrestor bolt.
£64.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny Low
Tier One - Scope Mounts 30mm Picatinny Low These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a display box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. Low Mounts 30mm Picatinny Measurement A = 22mm WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£129.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny Medium
Tier One - Scope Mounts 30mm Picatinny Medium These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£124.99
-
Eagle Vision Eagle Vision - Pard NV007 A/V Adapter Tube
Eaglevision Pard NV007 A /V Adapter Tube This tube is designed to replace the Pard NV007 A/V tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Example of use - You have purchased a Pard Adapter Kit, with the S connector and you now wish to connect an A/V 007 Pard - this is the part you require to purchase.
£24.99
-
ZB Lite ZB_Lite Pro - Adjustable Picatinny Mount - PARD NV 008 - Camiszon
ZB Lite Pro - Adjustable Picatinny Mount - Ideal for PARD NV 008 - Camiszon The zeroing block ZB Lite Pro is a universal mounting base that allows you to mount a variety of accessories to a gun weaver base, and allows you to change the elevation and windage to zero it * ZB Lite Pro can be used with conventional as well as with digital, Night Vision, Thermal Rifle Scopes, Red Dots and other devices that need to be mounted to a rifle. * It can be used forward or reversed to accommodate extra eye relief of specific scopes without reach forward mounts. * It is for recoilless or low recoil rifles. Giles Opinion - This is a handy mount for you Night Vision users. The finish is OK, but could be better, anodising is not perfect all round. However thats cosmetic. Specifications: Max weight to mount: (recoiless) : 800 gr (recoil up to 300G) : 200 gr Click Value Elevation : 1/4 MOA Click Value Windage : 1/4 MOA Max Adjustment Elevation: 90 MOA Max Adjustment Windage : 60 MOA Weight :200 gr Dimensions :145x65x27mm Top weaver rail length : 90 mm Locking jaws span : 54 mm
£94.95
-
Eagle Vision Eagle Vision - Pard NV008S / Sytong Convertor Rail for Original Mount
Pard NV008S / Sytong Convertor Rail for Original Mount Own one of the Original Pard NV008 adjustable mounts from Eaglevision - have you upgraded to a new Pard Version NV008S or have the Sytong system. This top rail allows you to change the top rail on the original mount to the new hole configuration. This is only the Pard NV008S / Sytong Rail - you must have the original mount to attach this to. This is for the rail in the picture ONLY. 1x top rail2x allen keys (two different sizes)6x side aluminium washers (not included with NV008, NV008P, NV008LFR) Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. See the fitting guide. Click Here.
£29.99
You have seen 71 out of 71 products
